This article is mainly talk about "How To Wire The LED Ceiling Lamp".

This article is mainly talk about "The Difference Between Copper Terminal And Cable Terminal".

This article is mainly introduce "Four Connection Technologies of Precision Terminal Blocks"

What Is a Connector?Connectors are a component that electronic engineering technicians often come into contact with. Its function is very simple: in the circuit is blocked or isolated between the circuit, A bridge of communication is set up to allow current to flow, allowing the circuit to perform i

Electronic connectors, also commonly referred to as circuit connectors, bridge the two conductors on one circuit so that current or signals can flow from one conductor to the other.

This article focuses on four common electrical connectors: D-Sub electrical connectors, USB electrical connectors, power electrical connectors and RF/coaxial electrical connectors.

Underestimating the dangers of lower voltage levels“It’s only 120 volts (or 208 or 480).” The only difference between low and high voltage is how fast it can kill you. High voltage kills instantly; low voltage may take a while longer. A 120 volt shock, for example, can lead to death up to 48 hour

This article mainly introduces the matters needing attention when installing wires in the family.

The main content of this paper is about the features of the electrical connector.

The main content of this article is about how current can cause harm to the human body.

This article mainly introduces the basic knowledge of electricity safety.

This is a passage mainly talking about 5 tips about safety in winter for electricians.

A brief introduction about heat shrink technology and where can we use it.

Classification and function of different types of terminal.

An electric unit of a power distribution device is equipped with a disconnecting switch which can be obviously segmented between other electrical parts. During partial power failure maintenance between these disconnecting switches, as long as safety measures are taken on the circuit breaker side or the side to be repaired at each disconnecting switch, operation safety can be guaranteed.

Why is PVC widely used? In fact, PVC is a widely used material in daily life. Spend two minutes in this article, then you will have an understanding of its meaning, characteristics applications.

Crimp systems are designed to compact the wire strands together to a set level so that no interstitial spaces (gaps) are left between the strands. This stops both moisture and oxygen entering the crimp and therefore prevents corrosion from occurring.

Solderless terminals are used to finish the connection to thousands of different electrical installations. They are very versatile and come in many styles to suit many applications. They are made of copper (economy versions use brass) and they are tin-plated to prevent corrosion.